The solid, heavy ribbed symmetrical cast iron planer tables have a total length of 3000 mm The total length of the infeed planer table is 1800 mm

For decades the Format-4 system with double sided disposable planer knifes proved its advantages. Perfectly manufactured and adjusted in the factory, you do not have to adjust the planer knives and expensive aligning tools do not have to be purchased.

It’s mere child’s play to change the planer knives. In less than a few minutes you can change the 4 knife cutterblock. Format-4 planer knives are instantly ready for action!
Your Format-4 can also be equipped with a standard or tersa knife cutterblock

Precise and comfortable quick adjustment of cutting depth from the operator side of the infeed table.
The large readout scale ensures that the depth of cut can be set extremely accurately The depth of cut can also be adjusted by "Power Drive" as an option

On demand the depth of cut can be set on the in-feed table at the touch of a button Turn the control switch for quick adjustment or fine adjustment is done with the push of a button. The LED display clearly shows the measurement.

The jointer fence may be tilted to any degree between 90° to 45°. There are positive-stops at the 90° and 45° positions.

The plan 51 L - planer fence can also be upgraded to the Aigner combi-planer fence.